GPS Jumbo Transparent Filter Housings are made of SAN material with innovative features like lower pressure drop at higher flow rate , larger connections, air venting provision , robust knife - edge , molded structure , zero bypass and leak proof sealing. They are sealed with top seated Buna - N / Silicon / Viton * O ring by positive tangential contact that eliminates accidental misplacement .

The larger body size allows for greater cartridge capacity , thus reducing the number of vessels normally required in parallel installation . The internal port has been enlarged from standard size to allow liquid to pass through with minimum restriction .

Housings are stress relieved for added clarity and strength . Transparent housings offer on - site examination of flow , cartridge performance and life.

Caps are manufactured of reinforced polypropylene and are available with 1 and 1.5 BSP ( F ) connections to match various flow rating and piping configurations . Caps are available with a pressure release mechanism to release the housing pressure when changing a cartridge .

Pressure relief mechanism is constructed of stainless steel spring and screw and black polypropylene button .

All caps come with four mounting brackets for easy installation .

All housings have been tested and passed the hydrostatic leak and burst pressure to ensure consistence safe performance .

* Viton is a registered trademark of Dupont.

Features & Benefits 

• Highly durable SAN material
• Lower Pressure Drop @ Higher Flow Rate
• Specially designed for higher flow rates.
• Ideal substitute for costly low pressure SS housings.
• An extra large cartridge results in higher dirt holding capacity.
• Molded Construction for Product Consistency
• Robust knife-edge design ensures consistent cartridge sealing
• Thicker Walls for Increased Strength
• Leak Proof Sealing
• Larger Connection for Maximum Output
• Air Release Mechanism
• Mounting Holes Provision

Materials of construction

Sump : SAN (Styrene Acrylo-nitrile)
Head : Reinforced Polypropylene
Vent : Polypropylene with SS Spring and Screw
Seal : Silicon

Configurations

Inlet/Outlet connection : 1 , 1.5
Connection type : Threaded BSP (F)
Cartridge type : DOE
Vent : Provided

Operating conditions

Max . Operating Pressure : 7 kg/cm2
Max . Operating Temperature : 700C

Cartridge Capacity

Single

Cartridge dimensions accepted

i)  110 mm OD X 10/254 mm
ii)  110 mm OD X 20/508 mm